This topic has been closed by the administrator. Comments are no longer accepted.
Hi!
Can someone please take a look at these .pdf plans for ASC strata rib: page 29 "Sope Transition - Hith slope to low slope"
Looking at the part titled pitch break (PB1). Is this a part manufactured by ASC? or is this a piece of roofing cut (but you couldn't bend it, could you?) or simply a piece of sheet metal?
also...can not find either neopreme mastic tape of butyl mastic tape as specified in the plans. It does not seem to be a product carried by local building stores.
Any help or suggestions are greatly appreciated.
Thanks,
Tim
Or copy this URL:
https://www.metalroofing.com/spirit/comment/2330/find/
I do not know whether ASC offers that as a pre-formed flashing. They might. However, many contractors would bend it themselves out of matching metal flat stock bought with the roofing. In most cases, it would be custom-made because it must meet the roof angle.
The tape sealant will not be something you can obtain locally in all likelihood.
I suggest contacting one of the MRA members who manufactures a lot of vertical panels and see if they cannot help you obtain this tape. Companies like ATAS International and Englert come first to mind.
10/14/2003
10/14/2003
Isaiah Industries, Inc.
10/14/2003